Everybody wants to have a professional-looking lawn and garden. Your string trimmer can get the job done quite well if it is utilized efficiently.
Shredding, scarring and scalping grass creates more yard work if your trimmer is not working at maximum power. This is why it’s vital to get the best string trimmer available to suit your needs.
Some trimmers can be straight or curved-shaft. Straight-shaft trimmers are more widely used and easier to operate. They are ideal for reaching grass and weeds under shrubs, bushes, and trees.
A good source: the filix has a wealth of information on the various trimmers for you to make an informed decision on the model that’s right for you.
There are ways to use your trimmer to help you get the best possible trim for your lawn and garden.
Know Your Spin
Your cutting technique largely depends on the spin direction of the trimmer.
If your trimmer spins counter clockwise, the blade will cut better on the right side of the machine, and the grass will come out on the left side.
As you move around edges, walkways or curbs, position the right side of your body closer to the area you are trimming. As the trimmer head cuts the grass, it wil come out on the opposite side.
Get the Right Cut
Even, precise cutting will have your lawn looking spruce and inviting. Always bear in mind that most of your cutting power comes from the ends of the string trimmer.
Here are some cuts to consider:
As long as the trimming ends are moving swiftly and freely, the grass will be more evenly cut.
Holding the trimmer parallel to the ground allows the grass to be cut more precisely. When you angle the trimmer, the grass is trimmed by the leading edge of the string.
Angle the string trimmer slightly as you cut the grass around fences, walls, curbs, and trees for perfect edging every time.
When you are cutting on parallel surfaces, it’s best to use the edging method to cut the grass. You have to angle the string trimmer vertically and lower the line straight down. Edging is ideal for trimming around pavers and concrete surfaces.
Screeding is a fast and efficient method to remove weeds in between sidewalks, driveways, and walkways.
Screeding involves tipping the string trimmer so that it barely hints at the pavement.
Next, get to the base of the weed and make your cut flush to the pavement.
Maintain a good balance as you angle the trimmer in this way. If your angle is too sharp or shallow, you may consume a lot of string power and not necessarily cut efficiently.
The cleanest cuts are achieved outside of the string trimmer since this is the quickest moving part of the string.
- Parallel Cutting
This is the most widely used cutting method. It is perfect for removing weeds and grass around fences and walkways. It’s best to get a level hold on the trimmer to get more accurate cuts.
Scything is ideal for larger tracts of grass. It involves making parallel cuts while maintaining a u-motion around you while swiveling the hips. Steady, controlled scything will give you more precise cuts.